- Download Tiepie Engineering Driver License
- Download Tiepie Engineering Driver Software
- Download Tiepie Engineering Driver Licence
Motor management systems in cars get more and more sophisticated. When these sophisticated systems malfunction, sophisticated measuring equipment is required to locate the cause of the problem. With the TiePie engineering Automotive Diagnostics Kit ADK610004DW, the automotive specialist obtains all necessary tools, an Automotive Test Scope ATS610004DW-XMSG and special automotive accessories, to perform most of the diagnostic tests to locate the problem, all conveniently packed in a protective case.
The CD menu allows you to install the driver files, software and manuals from the CD-ROM, but you can also select to install files directly from the TiePie engineering web site, which ensures the latest version of the files is installed. A connection to internet is then required. Drivers: for Windows 7/8/10, via website: Manuals: instrument manual and software user’s manuals color printed and digital, via website: Customer service; TiePie engineering instruments are designed, manufactured and tested to provide high reliability. TiePie engineering Koperslagersstraat 37 8601 WL Sneek The Netherlands EC declaration of Confirmity We declare, on our own responsibility, that the product TP801 PCI for which this declaration is valid, is in compliance with EN55011, EN55022, EN50081-1 and EN50082-1 according the conditions of the EMC standard 89/336/EEG. LibTiePie is a library for controlling TiePie engineering's test and measurement equipment. When pre samples are selected, both samples before and after the moment of disturbance are stored.The Handyscope HS4 DIFF is a 4 channel differential USB oscilloscope with a maximum sampling speed of 50MS/s and KSamples memory handyscope hs4 diff channel. The TiePie engineering USB connector at the load, e. Where can I download the latest firmware? VIAVI Network and Service Enablement NSE segment helps service providers and IT organizations optimize and maintain many of the world s largest and most complex networks.
Options:- ATIS Lite (Lite)
- ATIS Pro (Pro)
The Automotive Diagnostics Kit ADK610004DW contains a selection of TiePie automotive products neatly packed in a protective carry case.
The main component of the Automotive Diagnostics Kit ADK610004DW is the Automotive Test Scope ATS610004DW-XMSG. The differential Automotive Test Scope ATS610004DW-XMSG can be used via an ethernet connection (LAN, WiFi or WAN) but also still with a USB 2.0 / 3.0 connection. The built-in battery gives the Automotive Test Scope ATS610004DW-XMSG the possibility to perform fully wireless differential measurements.
Place the Automotive Test Scope ATS610004DW-XMSG near to the engine bay and connect its inputs to the points you want to measure. Your computer can remain at a safe distance, connected via WiFi to the automotive WiFiScope, that operates as access point. No hassle of USB cables between the scope and the computer that limit your flexibility.
The high sampling rate and large memory of the Automotive Test Scope ATS610004DW-XMSG are very useful for capturing and analyzing longer fast signals such as CAN bus communications.
Several other products are included for diagnosing and solving common and less common automotive problems such as sensor malfunctions, actuator malfunctions, ignition problems, timing problems, power deficiency, etc. Refer to the automotive articles for examples of solved automotive problems.
The contents of this versatile Automotive Diagnostics Kit ADK610004DW are:
| Amount | Item | Description | |
|---|---|---|---|
| 1 | Automotive Test Scope ATS610004DW-XMSG | 1 GSa/s four channel automotive WiFi oscilloscope with differential / single ended switchable inputs with SafeGround protection, SureConnect, resistance measuring, 250 MHz bandwidth, 14 bit resolution and 256 Mpts memory. | |
| 4 | Measure lead TP-C1812B | 3 m long, BNC to banana, low noise differential measure lead. | |
| 1 | Back Probe TP-BP85 - Set | 8 thin and flexible back probes, 1000 V CAT III with 4 mm banana socket. | |
| 2 | Ignition Pickup TP-IP250 | Capacitive secondary ignition pickup to be clamped on a spark plug wire. | |
| 1 | Current clamp TP-CC80 | 80 A current clamp with 2% accuracy and 4 mm shrouded banana sockets. | |
| 1 | Current clamp TP-CC600 | 600 A current clamp with 3% accuracy and 4 mm banana sockets. | |
| 1 | Accelerometer TP-ACC20 - 09 | Accelerometer with 2 axes, ±2 g range with 420 mV/g sensitivity. | |
| 4 | Differential attenuator TP-DA10 | Differential 1:10 attenuator, rated 300 V with 25 MHz bandwidth. | |
| 1 | Alligator Clip TP-AC50B Set | 5 alligator clips with 10 mm clamping range and 4 mm banana socket, rated for up to 60 V. | |
| 1 | Carry case BB454 | Carry case for all above mentioned items. | |
| 1 | WiFiScope power supply | To power the scope and charge its battery. | |
| 1 | Ground compensation Cable TP-GCC150 | To avoid measurement errors when measuring differentially, the external power supply is used and the device under test is not grounded. | |
| 1 | Probe compensation cable TP-DB9-BNC-30 | To calibrate standard oscilloscope probes using the built in calibration signal | |
| 1 | USB 3.0 cable, 1.5 m long | ||
| 1 | Network cable, 3 m long | ||
Optionally, the Automotive Diagnostics Kit ADK610004DW can be delivered with one of
| Amount | Item | Description | |
|---|---|---|---|
| 1 | ATIS Lite | Automotive Test and Information System Lite is a comprehensive knowledge base with generic information to help the automotive technician diagnose car problems. | |
| 1 | ATIS Pro | Automotive Test and Information System Pro is a comprehensive knowledge base with generic and brand specific information to help the automotive technician diagnose car problems. | |
Go to the description tab for detailed information of each item in the Automotive Diagnostics Kit ADK610004DW.
The Automotive Diagnostics Kit ADK610004DW contains a selection of TiePie automotive products neatly packed in a protective carry case.
Automotive oscilloscope
Heart of the Automotive Diagnostics Kit ADK610004DW is the Automotive Test Scope ATS610004DW-XMSG. This PC oscilloscope turns your computer into a sophisticated automotive diagnostic system. The Automotive Test Scope ATS610004DW-XMSG can be used via an ethernet connection (LAN, WiFi or WAN) but also still with a USB 2.0 / 3.0 connection. The built-in battery gives the Automotive Test Scope ATS610004DW-XMSG the possibility to perform fully wireless differential measurements.
Place the Automotive Test Scope ATS610004DW-XMSG near to the engine bay and connect its inputs to the points you want to measure. Your computer can remain at a safe distance, connected via WiFi to the automotive WiFiScope, that operates as access point. No hassle of USB cables between the scope and the computer that limit your flexibility.
Equipped with four differential inputs, this automotive oscilloscope guarantees measuring multiple signals without the risk of creating short circuits through the oscilloscope. This compact automotive oscilloscope is battery powered, which makes it easy to connect it to a laptop computer and perform measurements while driving the vehicle. The large input range, the long memory buffers and high maximum sampling rate make it the possible to capture almost any automotive signal. The built in SureConnect connection test feature on each channel informs whether the test points have electrical connection to test subject, leaving no doubt whether there is no connection or no signal.
Automotive Test and Information System
The ATIS Automotive Test and Information System is a large knowledge base with information on almost all electrical and electronic components that are used in the motor management system of a car. In an intuitive graphical environment background information on sensors and actuators can be found, as well as detailed schematics, diagnosis instructions, component locations with photographs of most available cars and example signals for proper functioning components. The unique point of ATIS is the direct coupling between the diagnosis instructions with the example signals to the measuring instrument. One click of the mouse in ATIS will launch the automotive measurement software and load the specific settings to measure on the particular component. The mechanic can focus on finding the problem, he does not need to find out how to setup the instrument.
The Automotive Diagnostics Kit ADK610004DW can be delivered with ATIS Lite or with ATIS Pro. ATIS Pro contains an extensive database with more schematics, connection diagrams and oscilloscope settings with reference signals.
Measuring leads
To connect the Automotive Test Scope ATS610004DW-XMSG to the automotive circuits, the Automotive Diagnostics Kit ADK610004DW contains a set of four special measuring leads. The Measure lead TP-C1812B is a 3 meter long low noise BNC to 4 mm banana measuring lead, specifically designed to be used on differential oscilloscope inputs. The two ends of the Measure lead TP-C1812B with the banana plugs can be placed 2 meters apart, without picking up external disturbances. The length of 3 meter allows to connect the instrument to components under the hood while the instrument is located on the passenger seat, making it possible to perform measurement while driving. The measuring lead is made of silicone, making it heat resistant and oil resistant, perfectly suitable for automotive applications. The 4 mm banana plugs make it possible to connect a variety of test points or clamps.
Current clamps
To measure large currents, like e.g. starting currents, a Current clamp TP-CC600 is included in the Automotive Diagnostics Kit ADK610004DW. The Current clamp TP-CC600 makes it possible to measure current with your automotive oscilloscope, without the need of breaking the circuit. Simply clamp the Current clamp TP-CC600 around the wire and measure the current, up to 600 A. Current measurements can reveal problems that with a voltage pattern remain hidden, like e.g. compression problems that are visible in the starting current.
Many components draw far less than 600 A, making the also in the Automotive Diagnostics Kit ADK610004DW included 80 A Current clamp TP-CC80 a more suitable current clamp. It will measure up to 80 A, giving a much higher accuracy at low currents than the Current clamp TP-CC600. Use it to reveal problems in driving injectors, measuring leakage currents etc.
Back probes
Download Tiepie Engineering Driver License
The Automotive Diagnostics Kit ADK610004DW contains a set of Back Probe TP-BP85s. These thin and flexible measuring probes fit on any test lead with 4 mm banana plugs and make it possible to connect to hard to reach places. They allow to back probe wires in connectors, without breaking the circuit, without the need of break out boxes and without damaging the wire isolation. The set contains 8 probes, four black ones, a red, a yellow, a green and a blue one, matching the input channel color coding of the Automotive Test Scope ATS610004DW-XMSG.
Ignition pickups
To safely measure the high voltage secondary ignition signals, the Ignition Pickup TP-IP250 is added to the Automotive Diagnostics Kit ADK610004DW. Simply clamp the Ignition Pickup TP-IP250 around a spark plug cable and measure the secondary ignition signals, both from normal ignition systems and DIS ignition systems. Two pickups are included.
Accelerometer and manual trigger button
The Accelerometer TP-ACC20 - 09 is a dual axis accelerometer combined with a manual trigger button. It can be connected to the extension connector at the rear of the Automotive Test Scope ATS610004DW-XMSG and two input channels.
The dual accelerometer measures accelerations up to 2 g in two planes. It can be used to measure vibrations in mechanical systems, but is can also be used to determine the maximum power of an engine, without the need of expensive equipment. Attach the acceleration sensor to the floor of the car and accelerate at full power. Using the weight of the car and the measured signal, the power can then be calculated by the software.
The manual trigger button can be used to trigger the automotive oscilloscope when the input signals are unknown. Connect the automotive oscilloscope to the sensors you want to check and start driving the car. As soon as the problem occurs, e.g. the engine holding back, press the manual trigger button. The automotive oscilloscope will now measure the signals and store them. Since the oscilloscope can store the signals before pressing the trigger button, later examination of the signals will show how the problem developed.
The manual trigger button can be used independently from the accelerometer.
Differential attenuators
The 80 V full scale input range of the Automotive Test Scope ATS610004DW-XMSG makes it possible to measure almost any automotive signal. In case the voltage exceeds 80 V, the Differential attenuator TP-DA10 can be used to increase the input range of the automotive lab scope. This special differential attenuator attenuates the input signal by a factor 10. It can be used when measuring e.g. primary ignition signals or fuel injector signals. The Automotive Diagnostics Kit ADK610004DW contains a Differential attenuator TP-DA10 for each channel of the lab scope.
Alligator clips
In order to connect to various types of terminals where the Back Probe TP-BP85 cannot be used, the Alligator Clip TP-AC50B Set is included. Small enough to be used in narrow places, but enough clamping range to clamp on larger objects. Five clips are included in the Automotive Diagnostics Kit ADK610004DW.
Convenient carry case
The Carry case BB454 is a convenient case for safely carrying your automotive tools. It offers dedicated storage locations for all parts of the Automotive Diagnostics Kit ADK610004DW, like the Automotive Test Scope ATS610004DW-XMSG and all accessories like measure leads, current clamps, test probes, ignition probes etc.
Several downloads for the Automotive Diagnostics Kit ADK610004DW are listed below, including Multi Channel oscilloscope software, drivers and manuals.
Driver & Software
| Description | Version | Remarks | Size | |
|---|---|---|---|---|
| USB driver | 8.1.9 | Windows 10, 32 and 64 bit | 3.80 MB | download |
| Multi Channel software | 1.43.4 | Windows 10, 32 and 64 bit, including PDF manual | 91.76 MB | download |
Manuals & Documents
| Description | Version | Remarks | Size | |
|---|---|---|---|---|
| Automotive Test Scope ATS610004DW-XMSG Instrument manual | 2.31 | English | 1.30 MB | download |
| Multi Channel software manual | 1.07 | English | 4.86 MB | download |
| Measure lead TP-C1812B user manual | 1.3 | English | 207.70 kB | download |
| Ignition Pickup TP-IP250 user manual | 1.3 | English | 228.82 kB | download |
| Current clamp TP-CC80 user manual | 1.3 | English | 305.46 kB | download |
| Current clamp TP-CC600 user manual | 1.3 | English | 293.49 kB | download |
| Accelerometer TP-ACC20 user manual | 1.3 | English | 875.29 kB | download |
| Differential attenuator TP-DA10 user manual | 1.3 | English | 207.01 kB | download |
| Brochure for Automotive Diagnostics Kit | English | 1.72 MB | download |
The WiFi labscope packed with technology
Price:€2,304.00
Key specifications
- WiFi / LAN / USB connected
- 14 bit (0.006 %) resolution (16 bit enhanced resolution)
- Up to 1 GSa/s sampling
- 250 MHz bandwidth
- Up to 200 MSa/s continuous streaming
- Up to 256 Mpoints memory per channel
- 0.25 % DC vertical accuracy, 0.1 % typical
- 1 ppm time base accuracy
Order code: ATS610004DW-XMSG
EAN: 7423624487478
Price: € 2,304.00
WiFi connected
Using a computer based oscilloscope was never easier than with the Automotive Test Scope ATS610004DW-XMSG: simply switch it on and start the software on the computer:
- no power cables required as it is battery powered and can operate hours on a fully charged battery
- no interface cables required as it uses WiFi to connect to the computer
This allows you to measure fully floating, fully isolated from your computer. The Automotive Test Scope ATS610004DW-XMSG can be placed near any test subject that may be hard to reach, or on moving objects, where wired connections are not possible.
Because the Automotive Test Scope ATS610004DW-XMSG is not connected to the computer, there is no risk of damaging the computer.
LAN connected
When measuring in remote locations where a wired network is available, the Automotive Test Scope ATS610004DW-XMSG can also be used through its LAN port. Measurements can then be performed from any location via the network, without having the computer to be close to the test subject.
Using its 1 Gbit LAN connection, the Automotive Test Scope ATS610004DW-XMSG can achieve higher streaming performance than via WiFi.
USB 3.0 connected
When wireless measuring or LAN connected measuring is not required or not possible, the Automotive Test Scope ATS610004DW-XMSG can also be connected via its USB3 port. This gives the benefit of even higher streaming performance. Additionally, when connected via USB, the Automotive Test Scope ATS610004DW-XMSG can be combined with oscilloscopes via its CMI interface.
This powerful automotive WiFi oscilloscope combines fast sampling up to 1 GSa/s with high resolutions of 12, 14 and 16 bit and a large memory of 64 Mpoints per channel with four differential channels. Additionally, the automotive WiFi oscilloscope supports continuous streaming measurements up to 200 MSa/s.
The Automotive Test Scope ATS610004DW-XMSG is delivered with SureConnect connection test and resistance measurement on each channel.
Also, the Automotive Test Scope ATS610004DW-XMSG is delivered with SafeGround. With SafeGround you can switch the differential inputs of the Automotive Test Scope ATS610004DW-XMSG into single ended inputs with ground protection. It allows to make measurements using standard attenuating probes or standard shielded measure leads and protects the scope when a short circuit to ground is created.
Rugged industrial design
The Automotive Test Scope ATS610004DW-XMSG features a rugged design. Its enclosure is fitted with rubber protectors at the front and the rear. These protect the Automotive Test Scope ATS610004DW-XMSG against damage by mechanical shocks. The rubber helps absorbing shocks and protects the connectors at the front and the rear of the Automotive Test Scope ATS610004DW-XMSG, these fall within the protected zone.
Additionally, the rubber prevents your Automotive Test Scope ATS610004DW-XMSG from sliding. The rubber protectors have special notches that simplify stacking instruments. Holes are included that allow to connect a strap to hang the instrument near the test subject.
Safe measuring
The Automotive Test Scope ATS610004DW-XMSG is a four channel automotive oscilloscope with differential inputs. With the differential inputs it is possible to measure four totally unrelated signals simultaneously. It is no longer possible to create a short circuit through the oscilloscope or through a second device connected to your computer and to the car, like e.g. a fault code scanner. So no risk of damaging the car, the oscilloscope or the computer.
Differential / single ended switchable inputs with SafeGround protection
SafeGround gives the possibility to use the oscilloscope inputs both as single ended and as differential. When SafeGround is active and you accidentally create a wrong connection that causes a short circuit, SafeGround will disconnect the ground of the input channel without damaging the oscilloscope or PC. You can therefore simply switch from a differential input to a single ended input without worrying if anything will damage because of a short circuit current. The Automotive Test Scope ATS610004DW-XMSG is the only automotive oscilloscope in the world with this unique SafeGround protection. And as you all know, a connection mistake is easily made, which will now have no more strange and financial consequences because of SafeGround as the short circuit current is limited thanks to SafeGround.
SafeGround is default available on each channel of the Automotive Test Scope ATS610004DW-XMSG.
SureConnect
The SureConnect connection test feature of the Automotive Test Scope ATS610004DW-XMSG tells you immediately whether your test probe or clip actually makes electrical contact or not. No more doubt whether your probe doesn't make contact or there really is no signal.
This is useful when surfaces are oxidized and your probe cannot get a good electrical contact. Simply activate the SureConnect and you know whether there is contact or not. Also when back probing connectors in confined places, SureConnect immediately shows whether the probes make contact or not.
SureConnect is default available on each channel of the Automotive Test Scope ATS610004DW-XMSG.
Resistance measurement
Many automotive sensors are based on variable resistors. Use your Automotive Test Scope ATS610004DW-XMSG in the resistance setting to test them, no more need to take a separate ohm meter. Resistance values can be displayed as a number, but it is also possible to display the resistance variation in time, in a graph.
The unique Automotive Test Scope ATS610004DW-XMSG Ohm scope is the first fast automotive Ohm scope in its class.
Large memory
When measuring at high sample rates, a large memory is necessary to be able to record a complete signal in the acquisition buffer. Where most oscilloscopes have 2.5 kpoints or 100 kpoints memory, the Automotive Test Scope ATS610004DW-XMSG has up to 256 Mpoints memory per channel. An advantage of a large memory is that once-only fast phenomena can be captured accurately or complete serial communication signal blocks can be measured all at once.
High accuracy
The Automotive Test Scope ATS610004DW-XMSG measures with high resolutions of 14 and 16 bit. A signal measured with the Automotive Test Scope ATS610004DW-XMSG therefore has 256 times more resolution than most standard automotive oscilloscopes, which usually have a low resolution of 8 or 9 bit. The input circuit of the Automotive Test Scope ATS610004DW-XMSG has a high accuracy of 0.25 % of the full scale input range, where most standard automotive oscilloscopes have an accuracy of 2 - 3 % of the full scale range. The precision Automotive Test Scope ATS610004DW-XMSG allows for measuring signals with much more accuracy.
The tables below show detailed specifications of the Automotive Test Scope ATS610004DW-XMSG. Jump to acquisition specifications, trigger specifications or general specifications.
Acquisition system | ||||
|---|---|---|---|---|
| Number of input channels | 4 analog | |||
| CH1, CH2, CH3, CH4 | Isolated female BNC | |||
| Type | Differential input | |||
| Resolution | 8, 12, 14, 16 bit user selectable | |||
| DC Accuracy | 0.25 % (0.1 % typical) of full scale ± 1 LSB at 20°C to 25°C To achieve rated accuracy, allow the instrument to settle for 20 minutes. When subjected to extreme temperatures, allow additional time for internal temperatures to stabilize. | |||
| Ranges (full scale) | ±200 mV ±400 mV ±800 mV | ±2 V ±4 V ±8 V | ±20 V ±40 V ±80 V | |
| Coupling | AC/DC | |||
| Impedance | 2 MOhm / 12 pF ± 1 % 1 MOhm / 20 pF ± 1 % when SafeGround enabled | |||
| Noise (in 200 mV range) | 300 µVrms | |||
| Maximum voltage | 200 V (DC + AC peak < 10 kHz) | |||
| Maximum Common Mode voltage | 200 mV to 800 mV ranges : 2 V 2 V to 8 V ranges : 20 V 20 V to 80 V ranges : 200 V | |||
| Common Mode Rejection Ratio | -47 dB | |||
| Bandwidth | ||||
| -3dB at 75 % of full scale input | 250 MHz | |||
| Limit, selectable per channel | Off (250 MHz), 150 MHz, 100 MHz, 50 MHz | |||
| AC coupling cut off frequency (-3dB) | ±1.5 Hz | |||
| SureConnect | ||||
| Maximum voltage on connection | 200 V (DC + AC peak < 10 kHz) | |||
| Resistance measurement | ||||
| Ranges (Full scale) | 1 kΩ 2 kΩ 5 kΩ | 10 kΩ 20 kΩ 50 kΩ | 100 kΩ 200 kΩ 500 kΩ | 1 MΩ 2 MΩ |
| Accuracy | 1 % of full scale | |||
| Response time (to 95%) | < 10 µs | |||
| SafeGround | ||||
| Maximum voltage on connection | 200 V (DC + AC peak < 10 kHz) | |||
| Maximum switch off current | 500 mA | |||
| Response time | < 100 ns | |||
| Maximum sampling rate | 8 bit | 12 bit | 14 bit | 16 bit |
| measuring one channel | 1 GSa/s | 500 MSa/s | 100 MSa/s | 6.25 MSa/s |
| measuring two channels | 500 MSa/s | 200 MSa/s | 100 MSa/s | 6.25 MSa/s |
| measuring three or four channels | 200 MSa/s | 100 MSa/s | 100 MSa/s | 6.25 MSa/s |
| Maximum streaming rate 1 | 8 bit | 12 bit | 14 bit | 16 bit |
| 8 bit | ||||
| measuring one channel | 200 MSa/s 2 | 100 MSa/s 3 | 100 MSa/s 3 | 6.25 MSa/s 6 |
| measuring two channels | 100 MSa/s 3 | 50 MSa/s 4 | 50 MSa/s 4 | 6.25 MSa/s 6 |
| measuring three or four channels | 50 MSa/s 4 | 25 MSa/s 5 | 25 MSa/s 5 | 6.25 MSa/s 6 |
| ||||
| Sampling clock source | ||||
| Internal | TCXO | |||
| Accuracy | ± 0.0001 % | |||
| Stability | ± 1 ppm over 0°C to 55°C | |||
| Time base aging | ±1 ppm/year | |||
| External | LVDS, on CMI connectors | |||
| Input frequency | 10 MHz ± 1 % 16.369 MHz ± 1 % | |||
| Memory | via USB | via WiFi/LAN | ||
| 8 bit resolution | ||||
| Measuring one channel | 256 MSa per channel | 64 MSa per channel | ||
| Measuring two channels | 128 MSa per channel | 32 MSa per channel | ||
| Measuring three or four channels | 64 MSa per channel | 16 MSa per channel | ||
| 12, 14, 16 bit resolution | ||||
| Measuring one channel | 128 MSa per channel | 32 MSa per channel | ||
| Measuring two channels | 64 MSa per channel | 16 MSa per channel | ||
| Measuring three or four channels | 32 MSa per channel | 8 MSa per channel | ||
| Trigger | ||||
| System | Digital, 2 levels | |||
| Source | CH1, CH2, CH3, CH4, OR, digital external | |||
| Trigger modes | Rising edge, falling edge, any edge, inside window, outside window, enter window, exit window, pulse width | |||
| Level adjustment | 0 to 100 % of full scale | |||
| Hysteresis adjustment | 0 to 100 % of full scale | |||
| Resolution | 0.006 % (14, 16 bits) / 0.025% (12 bits) | |||
| Pre trigger | 0 to selected record length, 1 sample resolution | |||
| Post trigger | 0 to selected record length, 1 sample resolution | |||
| Trigger hold-off | 0 to 63 MSamples, 1 sample resolution | |||
| Trigger delay | 0 to 8 GSamples, 1 sample resolution | |||
| Digital external trigger | ||||
| Input | Extension connector pins 1 and 2 | |||
| Range | 0 to 2.5 V (TTL) | |||
| Coupling | DC | |||
| Jitter | ≤ 1 sample | |||
Multi-instrument synchronization | ||||
| Combining instruments is only available when all instruments are connected via USB. When instruments are connected via LAN or WiFi, combining is not available. | ||||
| Maximum number of instruments | Limited by number of available USB ports | |||
| Synchronization accuracy | 0 ppm | |||
| CMI interface | 2x, CMI 1, CMI 2 | |||
| Required coupling cable | TP-C50H Coupling cable CMI | |||
| Maximum coupling cable length | 50 cm | |||
Probe calibration | ||||
| Output | Extension connector pins 3 (signal) and 6 (ground) | |||
| Signal | Square wave | |||
| Level | -1 V to 1 V | |||
| Frequency | 1 kHz | |||
Interface | ||||
| Interface | ||||
| USB | USB 3.0 SuperSpeed (5 Gbit/s); (USB 2.0 HighSpeed compatible) | |||
| Network | 1 Gbps | |||
| WiFi | 802.11 | |||
Power Requirements | ||||
| Power | From USB, external input or built-in battery | |||
| Consumption | 12 VDC 2 A max | |||
| External power | From power adapter | |||
| Internal battery | Li-ion | |||
| Capacity | 8000 mAh, 3.7 V | |||
Physical | ||||
| Instrument | ||||
| Height | 44 mm (1.7 inch) | |||
| Length | 187 mm (6.7 inch) | |||
| Width | 215 mm (5.2 inch) | |||
| Weight | 791 g (27.9 ounce) | |||
| USB cord length | 1.5 m (59 inch) | |||
I/O connectors | ||||
| Channel 1, 2, 3, 4 | Isolated BNC | |||
| LAN | RJ45 socket | |||
| USB | USB 3.0 type B Super Speed socket | |||
| Extension connector | D-sub 9 pins female | |||
| Power | 3.5 mm power socket | |||
| CMI connectors | 2 x HDMI type C socket | |||
System requirements | ||||
| PC I/O connection | USB 2.0, USB 3.0 or USB 3.1 RJ45 WiFi | |||
| Operating system | Windows 10, 32 and 64 bits Linux (via own software using the LibTiePie SDK) | |||
Environmental conditions | ||||
| Operating | ||||
| Ambient temperature | 20°C to 25°C for rated accuracy (10°C to 40°C without specifications) | |||
| Relative humidity | 10 % to 90 %, non condensing | |||
| Charging | ||||
| Ambient temperature | 0°C to 35°C | |||
| Relative humidity | 10 % to 90 %, non condensing | |||
| Storage | ||||
| Ambient temperature | 0°C to 35°C | |||
| Relative humidity | 5 % to 95 %, non condensing | |||
Certifications and Compliances | ||||
| CE mark compliance | Yes | |||
| RoHS | Yes | |||
| EN 55011:2009/A1:2010 | Yes | |||
| EN 55022:2006/A1:2007 | Yes | |||
| EN 61000-6-1:2007 | Yes | |||
| EN 61000-6-3:2007 | Yes | |||
Package contents | ||||
| Carry case | Carry case BB453 | |||
| Instrument | Automotive Test Scope ATS610004DW-XMSG | |||
| Measure leads | 4 x Measure lead TP-C1812B, Differential BNC -> 4 mm banana plug | |||
| Differential attenuator | 4 x Differential attenuator TP-DA10 | |||
| Alligator clips, large | Alligator Clip TP-AC80I - Set, 8 large alligator clips | |||
| Alligator clips, medium | Alligator Clip TP-AC10I - Set, 8 medium alligator clips | |||
| Alligator clips, small | Alligator Clip TP-AC5 - Set, 8 small alligator clips | |||
| Accessories | Ground compensation Cable TP-GCC150 WiFiScope power supply USB3 cable, 1.5 m long network cable, 3 m long Probe compensation cable TP-DB9-BNC-30 | |||
| Software | for Windows 10, via website | |||
| Drivers | for Windows 10, via website | |||
| Manuals | instrument manual and software user's manuals color printed and digital, via website | |||
Optional Accessories | ||||
| Optional accessories for the Automotive Test Scope ATS610004DW-XMSG need to be ordered separately | ||||
| Oscilloscope probe | Oscilloscope Probe 1:1-1:10 - HP-3250I | |||
| Measure lead single ended | Measure lead TP-BNCI-100 | |||
Customer service | ||||
| TiePie engineering instruments are designed, manufactured and tested to provide high reliability. In the unlikely event you experience difficulties, the TiePie engineering instruments are fully warranted for two years. | ||||
| This warranty includes | All parts and labor (excluding probes and/or measure leads and/or batteries) Warranty on batteries is 6 months. No charge for return shipping Long-term 7 year support Upgrade to the latest software at no charge | |||
The Automotive Test Scope ATS610004DW-XMSG is delivered with:
Download Tiepie Engineering Driver Software
| Carry case | Carry case BB453 |
|---|---|
| Instrument | Automotive Test Scope ATS610004DW-XMSG |
| Measure leads | 4 x Measure lead TP-C1812B, Differential BNC -> 4 mm banana plug |
| Differential attenuator | 4 x Differential attenuator TP-DA10 |
| Alligator clips, large | Alligator Clip TP-AC80I - Set, 8 large alligator clips |
| Alligator clips, medium | Alligator Clip TP-AC10I - Set, 8 medium alligator clips |
| Alligator clips, small | Alligator Clip TP-AC5 - Set, 8 small alligator clips |
| Accessories | Ground compensation Cable TP-GCC150 WiFiScope power supply USB3 cable, 1.5 m long network cable, 3 m long Probe compensation cable TP-DB9-BNC-30 |
| Software | for Windows 7/8/10, via website |
| Drivers | for Windows 7/8/10, via website |
| Manuals | instrument manual and software user's manuals color printed and digital, via website |
Several downloads for the Automotive Test Scope ATS610004DW-XMSG are listed below, including Multi Channel oscilloscope software, drivers and manuals.
Download Tiepie Engineering Driver Licence
Driver & Software
| Description | Version | Remarks | Size | |
|---|---|---|---|---|
| USB driver | 8.1.9 | Windows 10, 32 and 64 bit | 3.80 MB | download |
| Multi Channel software | 1.43.4 | Windows 10, 32 and 64 bit, including PDF manual | 91.76 MB | download |
Manuals & Documents
| Description | Version | Remarks | Size | |
|---|---|---|---|---|
| Multi Channel software manual | 1.07 | English | 4.86 MB | download |
| Automotive Test Scope ATS610004D-XMSG Instrument manual | 2.27 | English | 953.45 kB | download |